Language:

Use this function to select an OSD language from several options. There are 8 kinds of

languages English, Deutsch, Francais, Italiano, Eapanol, Русский,,.

Output Format:

Use Output Format to choose the output mode: XGA (1024 x 768), or SVGA (800 x 600). The default setting is XGA.

Pointer Color:

Adjust the color of the indication cursor by using the selection buttons (). R (Red) Æ G (Green) Æ B (Blue) Æ WhiteÆ Black, the default setting is Red.

Remark setting:

You may select "Box" or "Line" as the indication cursor. The default setting is "Box". If you use the mouse, the function is available by clicking the left button.

AC Freq:

Please check your power system frequency (50 or 60HZ) and set it to avoid the flickering from fluorescent lamp.

Factory Reset:

Use this function to reset all values to the factory default. Select Enter to confirm and Exit to skip. And it will show firmware version: “PNxxx/VNxxx.” (On the last row of this OSD)

5-7 SPS Settings and Operation

1Setting:Enter the password with your remote control, follow the step:" "+ " " + " " to initiate the SPS setting procedure.

2There are three groups available:Setting1~3. For example, if you want to set the Setting 1, do as follows:

SPS Setting

Setting 1

Setting 2

Setting 3

Default

V Off

Execute

Setting

2.1Press to open a screen and select the parameter group you want to specify. Press "Enter" to select Setting 1. Presson the remote control to enter the next layer.

SPS Setting

V Setting 1

Setting 2

Setting 3

Default

Off

15