Dukane DVP508 user manual Troubleshooting, Manual DIP Switch Settings for related

Chapter 11 Troubleshooting

This chapter describes problems you may encounter while using DVP508. If you have questions, please refer to related chapters and follow all the suggested solutions. If the problem still occurred, please contact our distributors or service center.

No.	Issues			Solutions
1	Boot without power	Make sure you have plugged in the power cord.
2	No image output	1.	Check the power.
	from the DVP508	2.	Check the connection, Refer to		User Manual
			Chapter 4 Installation and Connections
		3. Check the		, refer to User Manual Chapter 8
			Descriptions of major functions 8.3 I would like to
			switch image sources.
		4. Check the settings for the source of the projector. For
			the appropriate input selection of the projector, refer to
			the projectors user manual.
		5.	Check if DIP Switch is properly set. Refer to User
			Manual Chapter 6 DIP Switch Settings for related
			settings.
3	Unable to focus	Probably the document is too close. Press [Zoom -] on the
		remote control or control panel. Or pull away the
		distance between document and lens, then press [AF].
4	The image is	Check the Auto Image setting of your projector. Please refer
	incomplete	to the user manual of the projector.
5	Forget the	Please contact your distributor or the service center.
	password for
	turning on
6	Dukanes Document	Dukane Document Camera, Dukanes and other
	Camera, Dukanes	applications cannot be executed simultaneously. Please
	and other	close the currently running applications and then execute
	applications cannot	the application to be used.
	be used
	simultaneously
7	When the unit is	Please make sure the arm lamp is set to [OFF]. For the
	turned on, the	switch-on or -off of arm lamp, refer to User Manual
	auxiliary floodlight	Chapter 8 Descriptions of major functions 8.8 I would

English - 41