CONNECTING TO A STEREO SYSTEM
Stereo system
L
AUDIO OUT
R
COAXIAL
To ANALOG AUDIO INPUT jacks
To Right (red) and Left (white)
AUDIO OUT jacks
[Fig. 7]
NOTES:
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the TV/DVD.
•The monaural sound is output from the stereo system when the TV/DVD is in the TV mode.
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK (for DVD only)
Use an audio coaxial digital cable available at retail for the audio connections.
Amplifier equipped with digital
input jacks, MD deck, DAT deck, etc.
| L |
| AUDIO OUT |
| R |
| COAXIAL |
To COAXIAL DIGITAL | To DIGITAL AUDIO OUT |
AUDIO INPUT jack | (PCM/BITSTREAM) |
COAXIAL jack
(only DVD AUDIO OUT)
[Fig. 8]
NOTES:
•The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
•Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect set- tings may generate noise distortion, and may also damage the speakers. (See page 27 to set DOLBY DIGITAL to OFF.)
– 12 – | EN |