Duracraft DH-831 owner manual S E T U P

S E T U P

•Select a firm, level, flat location — at least six inches (15 cm) from any wall for proper air flow and convenient to an elec- trical outlet.

•Place the humidifier on a water-resistant surface, as water can damage fur- niture and some flooring. Duracraft® will not accept responsibility for property damage caused by water spillage.

F I L L I N G

We recommend that the humidifier be disinfected prior to first use. Please see CLEANING instruc- tions.

•Remove the Water Tank by grasping handle and pulling straight up. Set aside (Fig. 1).

➡ FIG. 1

•Remove the Upper Motor Housing from the Reservoir Base, being careful not to let the power cord drop into the base (Fig. 2).

FIG. 2

•Remove the Natural Cool Moisture™ filter from its frame in the Reservoir Base (Fig. 3). Run it under cold water; this will help reduce residue build-up. Turn the filter upside down before repositioning it in its frame. Replace in the humidifier. To help extend the life of your filter, repeat this step every time you fill your humidifier.

➡ FIG. 3

•Turn the Water Tank upside-down so that the fill cap is facing up; unscrew the fill cap by turning it counter-clock- wise.

•Fill the tank with COOL tap water (Fig. 4). Distilled water is not nec- essary as the water is fil- tered by the Natural Cool Moisture™ filter. DO NOT USE HOT WATER.

FIG. 4

•Replace the fill cap by turning it clockwise. DO NOT OVER TIGHTEN.

NOTE: WHEN CARRYING THE FILLED WATER TANK, PLEASE USE THE HANDLE AND PLACE YOUR OTHER HAND UNDER THE TANK FOR ADDITIONAL SUPPORT.