Durst 131 HS manual Technical Data, Durst Phototechnik

Technical Data

General specifications	Interfaces:	Paper transport
Power Supply:	• Ultrawide-SCSI	Feeding Device:
	• 100 Base T Fast Ethernet automatically
230/208 V AC ±10 %, single phase, 50/60 Cycles	switchable to 10 M bit	Lambda 131 HS-Turret:
Power Consumption:	• DEC 423 (modem)	5-position paper turret
	• RS 232 (for densitometer)	Lambda 131 HS:
max. 1500 VA/6 Ampere per phase		Single-position paper feed
Dimensions:		loading level: approx. 140 cm (55 in.)
	Imaging Specifications	Take-up Device:
Width: approx. 240 cm (95 in.)
Length: approx. 240 cm (95 in.)	Exposure system:	Automatic take-up device with automatic paper
Height:		loading and built-in automatic paper cutter
Lambda 131 HS-Turret: approx. 194 cm (77 in.)	patented continuous roll-to-roll, single beam,	Paper width and lengths:
Lambda 131 HS: approx. 180 cm (71 in.)	three color (RGB) laser full continuos tone
Weight:	exposure system.	Width	Length
	File Formats:	127.0 cm (50 in.)	50 m (164 ft)
Lambda 131 HS-Turret:		110.0 cm (43 in.)	50 m (164 ft)
approx. 1.500 kg (3.300 lb.)	• Grayscale CMYK and RGB-TIFF, TIFF/LZW,	106.7 cm (42 in.)	50 m (164 ft)
Lambda 131 HS:	BMP and JPEG	105.0 cm (41 in.)	50 m (164 ft)
approx. 1400 kg (3080 lb.)	• PostScript Level 2 and 3 (PS, single or	101.6 cm (40 in.)	50 m (164 ft)
Space requirement:	multipage, including CMYK, RGB and	81.2 cm (32 in.)	50 m (164 ft)
	Grayscale images) Type 1 fonts only)	76.2 cm (30 in.)	50 m (164 ft)
approx. 4 x 5 m (13 x 16 ft.)	• PDF (single or multipage)	70.0 cm (27,5 in)	50 m (164 ft)
Laserclass:	• RGB-PPM Raw format	50.8 cm (20 in.)	83 m (275 ft)
	Colors:	Minimum Print Length:
Laserclass I
Safety and Standard Specifications:	16.7 million possible colors	1 cm (0.4 in)
	(input 24 bit/Internal 36 bit)	Minimum Paper Advance:
CE	Adressable Levels:
		30 cm (12 in.), including exposed area
	256 levels each RGB	Max. Paper Waste:
Image Processor	Resolution:
		20 cm (8 in.) at the beginning of the media roll
Image Computer:	dual resolution of 200 and 400 pixels per inch
	(switchable) (Continuous tone) with on-the-fly
HP Linux-Workstation XW8200	pixel interpolation	Environmental requirements
RAM:	(4000 dpi apparent resolution)
	RIP:	Max. Altitude:
1 GB (2 x 512 DDR2-400)
Hard Disk:	Cheetah by Dice America	2.400 m (8.000 ft) above sea level
	Linear output speed:	Temperature range:
3 x 36 GB internal hard disks with 1500 RPM
Drives:	• 200 ppi	+ 15°C to 30 °C
	approx. 65 cm (26 in.) per minute, equal to	(+59 °F to 86 °F)
DVD	approx. 40 prints 100 x 130 cm (40 x 50 in.)	Relative humidity:
Operating system:	per hour.
	• 400 ppi	25-80 %
Red Hat Enterprise Linux	approx. 32 cm (13 in.) per minute
Monitor:	Laser:
HP TFT 19“ Monitor L1955	Red, green, blue
Graphic adapter:	Laser live time:
1 Nivida Quadro NVS 280 64PCI-E	guaranteed 12 months

Network Protocol:

TCP/IP, NFS (Network file system)

Durst Phototechnik

AG

Large Format Division Vittorio-Veneto-Straße 59 I-39042 Brixen, Italy Telefon +39 04 72 81 01 11 Telefax +39 04 72 83 09 80 www.durst-online.com info@durst.it

The latest technical developments are constantly being incorporated into Durst products. Illustrations and descriptions are therefore subject to modification. All rights reserved on images and illustrations.

© Durst Phototechnik AG, 08/2006 IX14015