3. Connecting your LabelWriter Printer
NOTE Do not connect the printer to your computer until after the software installation is complete.
To connect the power
1Plug the power cord into the power adapter. See Figure 3.
2Plug the power adapter into the power connector on the back of the printer. See Figure 4.
3Plug the other end of the power cord into a power outlet.
4Plug the USB cable into the USB port on the back of the printer.
5When the software is completely installed, connect the other end of the USB cable into an available USB port on your computer.
Mac OS If the printer is not in the printer list when the installation is complete, refer to the ReadMe file for instructions on how to add the printer.
Power adapter
Power cord
Figure 3
USB
Power
Figure 4
4
