Dymo TESA2 -2401000 Installing the Software, To install the software on a Windows system

2. Installing the Software

To install the software on a Windows system

NOTE Do not connect the printer to your computer until instructed to do so during the software installation.

1Insert the LabelWriter CD into your CD-ROM drive. After a few seconds, the installation screen appears. If the installation screen does not appear:

a.Click Start and then Run on the Windows taskbar. The Run dialog box appears.

b.Enter D:\install.exe (where D is the letter assigned to the CD-ROM drive) and click OK.

2Select the language version you wish to install and then follow the on-screen instructions.

To install the software on a Macintosh system

1Insert the DYMO LabelWriter CD into the CD-ROM drive.

After a few seconds, the DYMO Label Software Installer icon appears. See Figure 3.

2Double-click the Installer icon and then follow the on-screen instructions.

DYMO Label

Software Installer

Figure 3

3