9
To configure the printer on your wireless network
1From within the built-in software, click .
The Wireless Setup tool starts.
2Follow the steps in the Wireless Setup tool.
The wireless status light located on the top of the label
maker turns solid blue when the label maker is
successfully connected to a wireless network. See
Figure 8.
3After configuring the label maker as a wireless printer,
disconnect the USB cable from your computer.
4Place the printer in an easily accessed location.
5Plug the USB cable into the wall adapter and then plug the wall adapter into
a wall outlet.
6If necessary, press the power button to turn the printer on.
Adding the Wireless Printer
To print labels to the networked printer, you must download and install DYMO
Label™ v.8.5 or later from the DYMO Web site, and then add the printer to your
computer.
To add the wireless printer to a Windows computer
1Download DYMO Label™ v.8.5 or later from the DYMO Web site at
WirelessPnP.dymo.com.
2Close all open Microsoft Office applications.
3Double-click the Installer icon.
After a few seconds, the installation screen appears.
4Click Install and follow the instructions in the installer.
When the software installation is complete, you are prompted to connect
your printer.
5Without connecting your printer, click Finish, and then start the software.
Figure 8
Wireless
status light