Dyna-Glo KFA400DGD user manual Risk of Indoor AIR Pollution, Risk of BURNS/FIRE/EXPLOSION

Models: KFA400DGD

1 24
Download 24 pages 503 b
Page 2
Image 2

NEVER LEAVE THE HEATER

UNATTENDED WHILE BURNING!

DANGER: IMPROPER USE OF THIS HEATER CAN RESULT IN SERIOUS INJURY OR DEATH FROM BURNS, FIRE, EXPLOSION, ELECTRICAL SHOCK AND/OR CARBON MONOXIDE POISONING.

WARNINGS:

1. RISK OF INDOOR AIR POLLUTION!

Use this heater only in well ventilated areas. Provide at least a three-square foot (2,800 sq. cm.) opening of fresh outside air for each 100,000 BTU/hr. of heater rating.

• People with breathing problems should consult a physician before using the heater.

• Carbon monoxide poisoning: Early signs of carbon monoxide poisoning resemble the flu, with headaches, dizziness and/or nausea. If you have these signs, the heater may not be working properly.

Get fresh air at once! Have the heater serviced. Some people are more affected by carbon monoxide than others. These include pregnant women, persons with heart or lung disease or anemia, those under the influence of alcohol, or those at high altitudes.

• Never use this heater in living or sleeping areas.

2. RISK OF BURNS/FIRE/EXPLOSION!

NEVER use any fuel other than 1-K kerosene, #1 disel/fuel oil in this heater.

NEVER use fuel such as gasoline, benzene, paint thinners or other oil compounds in this heater.

(RISK OF FIRE OR EXPLOSION)

NEVER use this heater where flammable vapors may be present.

NEVER refill the heaters fuel tank while heater is operating or is still hot.

CAUTION :Hot while in operation. Do not touch. Keep children, clothing and combustibles away from heater.

Minimum Clearances: Outlet: 8 feet (250cm) / Sides, top and rear: 4 feet (125cm)

NEVER block air inlet (rear) or air outlet (front) of heater.

NEVER use duct work in front or behind of heater.

NEVER move, handle, service a hot, operating or plugged in heater.

NEVER transport heater with fuel in it’s tank.

• When used with an optional thermostat or if equipped with a thermostat heater may start at any time.

ALWAYS locate heater on a stable and level surface.

ALWAYS keep children and animals away from heater.

• Bulk fuel storage should be a minimum of 25 ft. from heaters, torches, portable generators or other sources of ignition. All fuel storage should be in accordance with federal, state or local authorities having jurisdiction.

3. RISK OF ELECTRIC SHOCK!

• Use only the electrical power (voltage and frequency) specified on the model plate of the heater.

• Use only a three-prong, grounded outlet and extension cord.

ALWAYS install the heater so that it is not directly exposed to water spray, rain, dripping water or wind.

ALWAYS unplug the heater when not in use.

PROPOSITION 65 WARNING: Fuels used in gas, wood-burning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

MASSACHUSETTS RESIDENTS: Massachusetts state law prohibits the use of this heater in any building which is used in whole or in part for human habitation. Use of this heating device in Massachusetts requires local fire dept. permit (M.E.L.C. 148, Section 10A.)

CANADIAN RESIDENTS: Use of this heater shall be in accordance with authorities having jurisdiction and CSA Standard B139.

NEW YORK CITY RESIDENTS: For use only at construction sites in accordance with applicable NYC codes under NYCFD certificate of approval # 5034 and 5037.

1

Page 2
Image 2
Dyna-Glo KFA400DGD user manual Risk of Indoor AIR Pollution, Risk of BURNS/FIRE/EXPLOSION, Risk of Electric Shock

KFA400DGD specifications

The Dyna-Glo KFA400DGD is an exceptional kerosene forced-air heater that is designed to provide reliable and efficient heating in various spaces, making it an ideal choice for construction sites, outdoor events, and garage workshops. With its robust construction and user-friendly features, this portable heater stands out for its performance and convenience.

One of the main features of the Dyna-Glo KFA400DGD is its powerful heating capability. This heater can deliver up to 400,000 BTUs, making it suitable for large areas, such as warehouses and outdoor settings. The capacity to heat spaces of up to 9,000 square feet ensures that users can enjoy a warm environment even in cold weather conditions. The adjustable heat settings provide flexibility, allowing users to customize the temperature according to their specific requirements.

Technology plays a crucial role in the efficiency and safety of the Dyna-Glo KFA400DGD. The unit is equipped with a built-in thermostat, which not only helps maintain the desired temperature but also enhances fuel efficiency. This smart feature reduces energy consumption while delivering optimal warmth. Furthermore, this heater includes a flame-out sensor that automatically shuts off the heater if the flame goes out, ensuring safe operation.

Durability is another hallmark of the Dyna-Glo KFA400DGD. Its heavy-duty construction is designed to withstand the rigors of demanding environments, ensuring reliable performance over time. The heater is built with a robust steel body that resists rust and corrosion, further extending its lifespan. Additionally, the high-temperature powder-coated finish enhances its durability and aesthetic appeal.

Portability is a significant advantage of the Dyna-Glo KFA400DGD. The unit features an integrated carrying handle and durable wheels, making it easy to transport from one location to another. Whether you need to heat a garage in winter or warm up an outdoor space for an event, this heater provides the mobility you need.

In summary, the Dyna-Glo KFA400DGD is a powerful, efficient, and portable heating solution that combines advanced technology with rugged durability. Its impressive heating capacity, safety features, and ease of use make it an excellent option for anyone in need of reliable warmth in large spaces.