Parts Page Reorder No. PD05•21

Effective May, 2005

Supersedes PD05•02

For Serial No. 4G1255 and Higher

Right Angle Mini-Orbital Sander

Air Tool Manual – Safety, Operation and Maintenance

SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL

Model:

58035 – 15,000 RPM

58037 – 12,000 RPM

58038 – 12,000 RPM

WARNING

Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel as well as adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Safety Institute (ANSI) Safety Code for Portable Air Tools – B186.1. For additional safety information, refer to – ANSI B7.1, Code of Federal Regulation

–CFR 29 Part 1910, European Committee for Standards (EN) Hand Held Non-Electric Power Tools – Safety Requirements and applicable State and Local Regulations.

SAFETY LEGEND

WARNING

Read and understand tool manual before work starts to reduce risk of injury to operator, visitors, and tool.

WARNING

Practice safety requirements. Work alert,

have proper attire, and do not operate tools under

the influence of alcohol or drugs.

WARNING

Eye protection must be worn at all times, eye protection to conform to ANSI Z87.1.

WARNING

Ear protection to be worn when exposure to sound, exceeds the limits of applicable Federal, State or local statues, ordinances and/or regulations.

 

WARNING

 

 

 

WARNING

 

Respiratory protection to be used when exposed to contaminants that exceed the applicable threshold limit values required by law.

Air line hazard, pressurized supply lines and flexible hoses can cause serious injury. Do not use damaged, frayed or deteriorated air hoses and fittings.

SAFETY INSTRUCTIONS

Carefully Read all instructions before operating or servicing any Dynabrade® Abrasive Power Tool.

Products offered by Dynabrade are not to be modified, converted or otherwise altered from the original design without expressed written consent from Dynabrade, Inc.

Tool Intent: Right Angle Mini-Orbital Sander is ideal for finesse sanding.

Do Not Use Tool For Anything Other Than Its Intended Applications.

This power tool is not intended for use in potentially explosive atmospheres and is not insulated against contact with electrical power.

Training: Proper care, maintenance, and storage of your tool will maximize their performance.

• Employer's Responsibility – Provide Right Angle Mini-Orbital Sander operator with safety instructions and training for safe use of tools and accessories.

Accessory Selection:

•Abrasive/accessory RPM (speed) rating MUST be approved for AT LEAST the tool RPM rating.

•Before mounting an accessory, visually inspect for defects. Do not use defective accessories.

•Use only recommended accessories. See back page of manual and Dynabrade Literature.

•Follow tool specifications before choosing size and type of accessory.

•Only use recommended fittings and air line sizes. Air supply hoses and air hose assemblies must have a minimum working pressure rating of 150 PSIG (10 Bars, g) or 150 percent of the maximum pressure produced in the system, whichever is higher. (See tool Machine Specifications table.)

Page 2
Page 1
Image 1
Dynabrade PD0502 specifications Model, Safety Instructions, Accessory Selection
Page 2

PD0502 specifications

The Dynabrade PD0502 is a versatile and highly efficient pneumatic random orbit sander designed to meet the demanding needs of professional users in various industries. Known for its exceptional performance and durability, this tool stands out as a key asset for achieving a flawless finish on surfaces such as wood, metal, and composites.

One of the standout features of the PD0502 is its random orbit action, which allows it to produce a swirl-free surface finish. This is crucial for applications where aesthetics matter, as the sander effectively minimizes the risk of visible sanding marks or scratches. The tool’s lightweight construction, weighing only a few pounds, further enhances maneuverability, making it easy to handle during extended use without inducing operator fatigue.

The PD0502 boasts a powerful yet quiet pneumatic motor that operates at a high speed, delivering an impressive orbit per minute, ensuring quick material removal while maintaining control. This motor is designed for consistent performance, meaning users can rely on it for all sanding tasks, from rough material removal to fine finish sanding.

Another key characteristic of the Dynabrade PD0502 is its superior dust collection system. Featuring a built-in vacuum option, this sander efficiently removes dust and debris from the work area, resulting in a cleaner workspace and improved visibility during operation. This not only enhances productivity but also contributes to a healthier work environment by minimizing airborne particles.

The tool is compatible with various sanding pads, allowing users to select the appropriate grit for their specific needs. This versatility makes the PD0502 suitable for a wide range of applications, from automotive refinishing to woodworking and everything in between. Furthermore, the sander is designed with an ergonomic grip that provides comfort during operation, reducing strain on the hands and wrists.

In summary, the Dynabrade PD0502 is a high-performance pneumatic random orbit sander that combines innovative technology with user-friendly features. Its random orbit action, efficient dust collection system, and lightweight design make it an indispensable tool for professionals seeking to achieve exceptional finishes with ease and precision.
Top Page Image Contents