Dynacord manual F120, L O U D S P E A K E R S

Models: F12

1 8
Download 8 pages 54.7 Kb
Page 2
Image 2
F120

Manual backgroundF9

The F9CWH is an extremely powerful and yet compact Mid/Hi- cabinet that has been designed for medium and long-throw applications. The Constant Directivity horn HT94 is coaxially aligned in a conical mid-frequency horn and offers a nominal radiation angle of 90° x 40°, which provides extremely smooth transmission without distressing interference in the x-over frequency range between the mid and high-frequency horns.

The mid-frequency range is reproduced by an Electro-Voice DL 12ST speaker system, while high frequency reproduction is taken care of by an Electro-Voice DH2T driver with titanium diaphragm, which is renowned for his excellent vocal definition and crystal-clear treble sound. The SPL of 105dB/1W/1m allows almost doubling the throw-capability of conventional direct-radiating loudspeaker cabi- nets.

Employing at least two Lo-cabinets per side – e.g. two F5 or two F118 – for bass sound reproduction is recommended to match bass- SPL to the exceptionally high efficiency of the F9CWH.

(also refer to “Xa5-System” in the Application Guide on page 54).

Manual backgroundF120

By designing its 2-way speaker system F120, DYNACORD set a new standard for professional 12" 2-way cabinets. A sound pressure level of 100 dB, wide coverage and its excellent sound quality make the F120 equally suitable to be used as full-range cabinet or as Mid-Hi component in active 2-way applications. When comparing the F120 to conventional 12" 2-way speaker systems, it provides nearly double the throw and power as well as a convincingly natural reproduction of vocals. An Electro-Voice DL12 ST 12" speaker serves a s woofer system while an Electro-Voice DH2T driver with titanium diaphragm and HT94 Constant Directivity horn provides exceptionally powerful mid-range sound and crystal-clear trebles. The newly designed frequency x-over is furnished with halogen lamps and thermal-breakers, which provide reliable protection against overload. The system-switch on the connection board allows easily configuring the F120 for full-range operation or connection to DYNACORD system power amps like the PM 2600 or Xa2600. The carrying handles are prepared for retrofitting a TÜV-approved rigging-kit to allow trouble-free “flying” applications.

L O U D S P E A K E R S

41

Page 2
Image 2
Dynacord manual F120, L O U D S P E A K E R S