Dynalink RTA1030W Hardware Interface, Chipset, Regulatory Approval and Compliance, Physical

Single Ethernet Port with 11g Wireless and Firewall

Technical Specifications (RTA1030W)

Hardware Interface

•One RJ-11 port for ADSL connection

•IEEE 802.11g and 802.11b Wireless LAN interface

•Single Ethernet port for IEEE 802.3/802.3u 10/100 Base-T auto-sensing, auto cross-over

•One USB port compliant to USB v1.1

•One hidden reset button for restoring factory default settings

Chipset

•Broadcom BCM6348 single-chip ADSL2+ with integrated MIPS32 CPU, transceiver & Analog Front End

Regulatory Approval and Compliance

•ACA

•Telecom New Zealand PTC270

Power Requirement and Operation

Environment Requirement

•Power Adaptor: Output 12 VAC, 1A

•Power Consumption: less than 10 W

•Ambient Temperature: 0 to 40°C

•Relative Humidity: 20% to 90% (non-condensing)

Physical

•Broadcom BCM4318 single-chip 802.11g wireless LAN solution

Wireless LAN

• Supports IEEE 802.11g and 802.11b

•Front Panel: 6 LED Indicators

•Back Panel

•Data Rates: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for 802.11g and 11, 5.5, 2, 1 Mbps for 802.11b

•Diversity antenna system: one external antenna and one internal antenna

•Maximum RF output power: 18dBm for 802.11g

•Coverage Area:

802.11g: LOS (Outdoors): Max. 50 meters;

Indoors: Max. 20 meters

802.11b: LOS (Outdoors): Max. 180 meters;

Indoors: Max. 60 meters

•Support WEP (Wired Equivalent Privacy) RC4 with 64-bit or 128-bit key length

•Support Access Control List, only registered WLAN clients are allowed

•Support 802.1x, WPA-PSK, WPA, WPA2 & Mixed WAP/WPA2.

www.dynalink.co.nz

www.dynalink.com.au