Set-up Guide

Introduction:

Hart Dynamics Electracoustic® Percussion Products are the result of over 15 years of research and development and represent the most comprehensive electronic percussion instruments available. Easy enough to use for the begin- ning drummer with features that allow the most advanced user flexibility never before acheived. To assure proper set up, take full advantage of your instruments functions, and to enjoy long and trouble free use, please read this Set-up Guide carefully. For additional assistance you may reference our website or call our technical support line (see below).

How to use this Guide:

This Set-up Guide is designed to help you configure your instrument to the “power on” stage. Please refer to your Drum Module Owners Manual for playing and programming. After basic operation is achieved, you will probably want to “fine tune” settings to your personal style and taste.

Conventions:

TRS stands for Tip / Ring / Sleeve. This is the same as a “stereo” jack,where one input, output or cable can carry two signals at the same time. You must use a TRS cable for dual trigger instruments and choke functionality.

STEREO/TRS 1/4” PLUG

MONO 1/4” PLUG

INSTALLATION INSTRUCTIONS

STUDIO EPEDAL (SWITCH)

1. Place EPEDAL on floor and position to desired location.

2. Install cable into jack on side of pedal and other end into module input labeled PEDAL, HH PEDAL, HH CONTROL,

ETC...

3.IMPORTANT: When turning on module, it is very important that pedal is plugged in and in the full open position. Module must calibrate pedal at power on. If unplugged or depressed, pedal will not function properly and back- wards sounds (open-down/closed-up) will occur.

4.Adjust sound module sensitivity and enjoy!

We value your patronage and are very much interested in any comments you might have. You may write or e-mail us so that we may use your input to continue to provide the best products and services available.

Enjoy!

Peter Hart

For cable diagrams, specifications and recommended settings for all current drum modules,

please visit our website at: http://www.hartdynamics.com/support/index.html

If you require additional assistance, you may contact our technical support line at

(850) 654-1455.

Copyright© 2005 HDI

All information and appearances contained herein are subject to change without notice.

Any reference to trade names and/or trademarks are presumed to belong to their respective commercial entities.

Page 2
Image 2
Dynamic Distributors Studio Switch manual Set-up Guide, Introduction, How to use this Guide Conventions

Studio Switch specifications

Dynamic Distributors Studio Switch is an advanced broadcasting and production switcher designed to meet the evolving needs of modern media professionals. This powerful piece of equipment seamlessly integrates advanced technologies and user-friendly features to elevate content creation, whether in live event broadcasting, television production, or streaming applications.

One of the standout features of the Studio Switch is its multi-input architecture. It supports a wide range of video sources, including HD and 4K cameras, graphics, and pre-recorded content, ensuring that users can easily switch between various inputs without compromising quality. The ability to mix different video resolutions and formats provides versatility, making it a valuable asset for any production team.

Additionally, the Studio Switch offers real-time video processing capabilities. With low latency and high-quality transitions, producers can create professional-grade outputs on the fly. In a dynamic broadcast environment, this responsiveness is essential for maintaining viewer engagement and delivering polished content.

User-friendly operation is another hallmark of the Dynamic Distributors Studio Switch. Featuring an intuitive touchscreen interface, operators can quickly access functions such as transitions, effects, and previews. Customizable layouts allow users to set up their workspace according to their specific workflows, enhancing overall efficiency during production.

Integrated automation features also allow for enhanced workflow management. Users can schedule sequences, automate repetitive tasks, and utilize macros to streamline complex processes. This functionality not only saves time but also reduces the potential for human error, resulting in more reliable production outcomes.

The Studio Switch is built with robust connectivity options, supporting HDMI, SDI, and even NDI protocols. This flexibility ensures that producers can work seamlessly with various equipment and network configurations, facilitating remote productions and collaboration across multiple sites.

Security is another critical aspect, as the Studio Switch comes equipped with advanced encryption protocols and user access controls, ensuring that sensitive content remains protected during broadcast and production.

In summary, the Dynamic Distributors Studio Switch is a cutting-edge tool that combines advanced technologies and user-centric design to cater to the needs of modern media professionals. Its versatility, ease of use, and robust feature set make it an essential component for any production environment, empowering creators to deliver high-quality content efficiently and effectively. Whether in a studio or on location, the Studio Switch provides the functionality and reliability that today’s content creators demand.