Dynasty Spas in.k600 user manual Main Functions, Standby Mode Display Time Progress Bars

Quick Reference Card

plete info on the features of your spa system

in.k600

Advanced series of full-function keypads that give complete control to wet fingers!

Description

Operation Mode Menu title AM/PM (˚F/ ˚C)

Information

Display

Time, temperature

&message digits

Progress bar icon

Light icons

Pump icons

Aeware's new se ries of keypads features a high profile with a large LCD display, menu-driven interface and raised keys that let users easily control all in.xm functions and programming directly from spa side, creating a true and unique user experience.

			"Mode" Key
"Soft" Key 1,		"Plus" Key increases	selects mode of
2, 3, 4	"Ok" Key	parameter setting	operation: Spa,
			Audio, Options

Right"

Multi-

unction

Key

Status icons	Lock icon	Service icon	"Left" Multifunction Key	"Minus" Key	"Next" Key goes to
			goes back to previous	decreases par-	menu page
			parameter setting or	ameter setting
			increases parameter value

Main Functions

•Start Pump 1

•Start Pump2

•Start Light

•Starting Blower

•Economy Mode

•Standby Mode

•Display Time

•Progress Bars

This menu allows control of all pumps, blower and spa light, as well as the activation of the Economy and Standby modes. Every time a device is on, its animated icon is displayed. All pump activity can be stopped at once by activating the Standby mode.

•Press Mode keyto display the mode Selection window.

•Select Spa to view Spa menu.

Starting Light

•Select Light key to turn light on.

•Select Light key again to turn light off.

(120 minute built-in timer)

Starting Blower

•Select Blower to turn Blower on.

•Select Blower once more to turn blower off.

(20 minute built-in timer)

Starting Pump 1

•Select Pump 1 to turn Pump 1 on.

•Select Pump 1 repeatdely to control pump 1 speeds.

(20 minute built-in timer)

Turning Economy on

Lowers the temperature set point of the spa by 20˚F (11˚C).

•Select Economy to activate the Economy mode.

•Select Economy again to override economy programming (see spa setup section)

Starting Pump 2

•Select Pump 2 to turn Pump 2 on.

•Select Pump 2 once more to turn pump 2 off.

(20 minute built-in timer)

Standby Mode

Stops all pumps at the same time by a simple click of a button!

•Select Standby to activate this mode.

•Select Standby to again to resume normal operations.

System automatically returns to Normal mode after a certain period of time, unless the Standby mode has been reactivated.

Spa light will flash for a few seconds before the exit of Standby mode and restart the pumps. The "Standby" message is also displayed during Standby mode.

*Pump will stay turned on if there is a request for more heat.

Starting Pump 3

•Select Pump 3 to turn Pump 3 on.

•Select Pump 3 once more to turn pump 3 off.

(20 minute built-in timer)

Displaying time

•Press Ok key to display the time.

•Press Ok key a second time to go back to water temperature display.

Next menu page

•Press Next key to display the next page in the spa menu.

Goes to blower option

Viewing active progress bars

A progress bar is a visual indicator of the time remaining before a device is turn off or before the end of the Standby mode. Only one bar is displayed at the time.

•Use Left or Right keys to visualize the progress bar of each activa- ted device.