Positioning
A
BB
Fig. 3 Positioning the loudspeakers.
Positioning
CAUTION | EXCESSIVE BRIGHTNESS |
Direct sunlight or excessive brightness can affect the color of any natural wood veneer (the structural integrity of the cabinet will not be affected).
XTo maintain the aesthetic quality of the Focus loudspeakers for the long term, placing such in very warm, very cold, or very humid environments should be avoided.
The Focus range consists of classic bass reflex loudspeaker designs with no unusual or extraordinary positioning demands. Every room will still have its own particular sound characteristics. All rooms are shaped and decorated differently, and therefore remain unique regarding options for positioning loudspeakers. The following steps are
wwwgeneral sugge.fshifitions t at will make.thecnorrect positioning easier to achieve.
General recommendations
Following explanations refer to Fig. 3:
•The distance between each loudspeaker and your listening position should be the same (B). Try to achieve an isosceles triangle.
•The distance between the loudspeakers should be the same or better slightly less than the distance between each loudspeakers and your listening position (A, B).
•The closer the listening position is in relation to the loudspeakers, the closer the speakers can be positioned to each other
•As a starting point, it is recommended that the speakers be about 2 meters apart from each other for the best results (A).
•If the speakers are positioned too close to each other, the stereo image will not seem
A < B | realistic; if that distance is too wide, the image may leave an acoustic hole in the |
| middle. |
•Paying attention to the image during listening tests will help dictate optimum placement during experimentation and
Dynaudio Focus | 5 |
