Dynex DX-1022, DX-1122, DX-1222, DX-922 manual

DX-922 / DX-1022 / DX-1122 / DX-1222

Mobile Battery Pack

Before using your new product,

please read these instructions to prevent any damage.

QUICK SETUP GUIDE

Package Contents

•Mobile Battery Pack

•Micro USB Charging Cable

•Quick Setup Guide

Charging the mobile battery

Fully charge your mobile battery pack before using it for the first time.

LEDs

OUT 5V/1A

Micro IN 5V/1A

USB (input)

1Plug the small end of the USB cable into the mobile battery’s microUSB port (input).

2Plug the large end of the included USB cable into a standard USB port on your computer, car charger, or wall charger (not included). The mobile battery automatically begins charging.

Charging your electronic device

USB (output)

OUT 5V/1A

1Plug the large end of the USB cable into the mobile battery’s USB port (output).

2Plug the small end of USB cable into your device.

The mobile battery automatically begins charging your device.

Recharge the mobile battery when the LED starts blinking.

Note: If your device requires a different connector than the one provided, use the cable that came with your device