Changing the picture settings 19
DX-19L200A12
Setting the TV picture size
To set the TV picture size:
1Press MENU. The Main Menu screen appears.
2Press or to select Picture, then press or
ENTER. The Picture menu opens.
3Press or to select Picture Size, then press or
ENTER. The Picture Size menu opens.
4Press 0 to 4 to select the picture size you want.
Notes:
Selectable picture sizes may vary depending on the input source or
broadcast signal.
Picture Size menu also can be displayed by pressing ZOOM on the
remote control.
You can choose from the following picture sizes:
Notes:
Some High Definition and/or Digital broadcasts may not allow you to
change the picture size.
In HDMI or Component mode with a scanning rate of 720p, 1080i, or
1080p (HDMI only), only the Cinema Wide2 and Full picture sizes are
available.
In PC mode, only the Natural, Full, and Native picture sizes are
available. In PC mode
(WXGA) only the Full and Native picture size features are available.
5Press EXIT to return to the normal screen.
Audio
Channel
Lock
Setup
Main Menu
Picture
>>
ENTER :Set:Select
CH

Picture

Picture PreferencePicture SettingDynamic GammaPicture SizeFilm ModePC SettingDNRSports
>>
On
>>
On
>>
On
:Adjust:Select

Picture Size

1.Cinema Wide12.Cinema Wide2
[0-4] :Select
0.Natural4.Full3.Cinema Wide3
Aspect ratio option Example
Natural:
Displays the original 4:3 aspect
ratio with vertical black bars
on the left and right of the
image. If the original aspect
ratio is 16:9, the image
displays in 16:9.
Cinema Wide 1:
Expands the image to fill the
screen. The top and bottom of
the image may be cropped.
Cinema Wide 2:
Use this option to view
content recorded in a 16:9
(wide-screen) aspect ratio.
Cinema Wide 3:
Stretches the image at the
edges, but keeps a clear image
in the center.
Full:
Displays the image at the
maximum size.
DX-19L200A12_11-0606 MAN_ENG_V1.book Page 19 Thursday, November 3, 2011 10:06 AM