30 Dynex 24" LED TVDX-24E310NA15
www.dynexproducts.com
5If you selected Auto for Mode, press or to
highlight Time Zone, then press or to select
your time zone. You can select Eastern, Central,
Mountain, Pacific, Alaska, Hawaii, Newfoundland,
or Atlantic.
6If you selected Auto for Mode, press or to
highlight Daylight savings time, then press or
to select On (if your viewing area observes Daylight
Savings Time) or Off (if your viewing area does not
observe Daylight Savings Time).
7If you selected Manual for Mode, set the date by
pressing or to highlight Year , Month, or Day,
then pressing or to adjust the setting.
8If you selected Manual for Mode, set the time by
pressing or to highlight Time, then pressing
or to select the hour, minute, or AM/PM field. Press
or to adjust the setting.
9Press ENTER. The Choose Your Picture Mode screen
opens.
10 Press or to highlight Home Mode or Retail
Mode, then press ENTER.
If you selected Retail Mode, a message asks you to
confirm your selection. Retail Mode is not an energy
savings mode. Select Yes to continue using Retail
Mode, or select No to change your selection, then
press ENTER.
The Choose Your TV Source screen opens.
11 Press or to highlight Antenna, Cable, or
Cable/Satellite Box, then press ENTER.
AIf you are using an antenna for a standard or HD
TV signal, select Antenna. Your TV scans for
available channels. The scan may take several
minutes. During scanning your TV searches for
digital channels first. When the digital channel
search is complete, a message appears asking if
you want to search for analog channels. Select
Yes to continu e searching for analog channels, or
select No to stop searching for channels.
BIf your cable is connected directly to the TV
(using no tuner box), select Cable. Your TV scans
for available channels. The scan may take several
minutes.
CIf your cable or satellite TV is connected to your
TV through a tuner box, select Cable/Satellite
Box. Your TV does not need to scan for channels.
A message tells you to select the correct input
source. Go to the next step.
4To watch TV, press INPUT, press or to highlight
the video input source for your TV in the INPUT
SOURCE list, then press ENTER.
• If your T V is connected to an antenna, cable TV (no
box), or cable or satellite TV box using a coaxial
cable, select TV.
• If your TV is connected to a cable or satellite box
using an HDMI cable or HDMI cable with a DVI
adapter, select HDMI1 or HDMI2.
• If your TV is connected to a cable or satellite box
using an AV cable, select AV.
Note
The channel scan can take up to 20+
minutes. You can press EXIT to stop the
auto channel search, but you will need to
run the auto channel search again to
create a channel list.