Using the remote control 17

DX-32L100A13

Connecting a home theater system with

multiple devices

The connections you make depend on the video and
audio jacks available on your devices. Refer to the
documentation that came with your devices for
connection information.
Remember to use the best connection types available for
the best picture and sound. For information about
connection types, see “What connection should I use?” on
page 8.
Using the remote control

Installing remote control batteries

To install the remote control batteries:
1While pressing the cover release latch on the back of
the remote control, lift the cover off the remote
control.
Remote Control 1
Remote Control 2
2Insert two AAA batteries into the battery
compartment. Make sure that you match the + and –
symbols on the batteries with the + and – symbols in
the battery compartment.
3Replace the battery cover.
Remote Control 1
Remote Control 2

Aiming the remote control

To aim the remote control:
• Point th e remote control towards the remote senso r
on the front of your TV.
Notes
We recommend that you connect the AV receiver’s
HDMI OUT jack to one of your TV’s HDMI IN jacks.
Then, connect the AV receiver’s DIGITAL AUDIO
INPUT jack to your TV’s DIGITAL OUTPUT jack to
route Dolby Digital audio.
Blu-ray player/DVD player/VCR Cable or satellite TV box
AV receiver
Computer
Game console
or camera
Antenna or cable TV
connected directly to
the wall jack
Cautions
Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
Do not mix batteries of different types.
Do not mix old and new batteries.
Remove batteries when the charge is depleted.
If the remote control is not going to be used for
an extended period of time, remove the
batteries.
12-0956_DX-32L100A13 MAN_V2_EN.book Page 17 Monday, September 24, 2012 10:39 AM