4Installing the stand or wall-mount bracketDX-32L100A13
Installing the stand or wall-mount bracket

Installing the stand

To install the stand:
1Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.
2Secure the stand to the stand column on the TV with
the six screws M4 type (16 mm) provided.

Installing a wall-mount bracket

To attach your TV to a wall-mount bracket:
1Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches. If you don’t need to remove
the base (that is, if you are removing your TV from
the box for the first time), skip to Step 3.
2Remove the six screws that secure the base to the
stand, then remove the base.
3Attach the wall-mount bracket to your TV using the
mounting holes on the back of your TV. See the
instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
TV components

Package contents

• Remote control and batteries (2 AAA)
• Stand with screws
•Quick Setup Guide
• Important Information
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.
Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket.
Note
The length of the M5 wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
7.87 in. (200 mm)
7.87 in. (200 mm)
Wall mount bracket holes
12-0956_DX-32L100A13 MAN_V2_EN.book Page 4 Monday, September 24, 2012 10:39 AM