Troubleshooting

5

Using headphones (not supplied)

For private listening, you can connect headphones with a 1/8" plug to the headphone jack on the left side of the TV. Connecting headphones automatically mutes the built-in speakers.

To protect your hearing, follow these guidelines when you use headphones:

•Set the volume to the lowest setting before you begin listening.

•After you begin listening, adjust the volume to a comfortable level.

•Do not listen at extremely high volume levels. Extended high-volume listening can lead to permanent hearing loss.

•After you set the volume, do not increase it. Over time, your ears adapt to the volume level. A volume level that does not cause discomfort may still damage your hearing.

Using an external antenna (not supplied)

If you are in an area with weak TV signals or inside a concrete building, you may need an external antenna to improve reception.

To connect an external antenna:

•Connect the external antenna to the RF IN jack on the right side of the TV. Use the supplied L-shaped F-connector adapter if necessary.

Troubleshooting

Problem

 

Resolution

 

 

 

 

 

There is no sound or

 

• Increase the volume level.

power.

 

• If using the built-in battery, connect the AC power

 

adapter.

 

 

 

 

 

The picture quality is

 

• If the picture is not clear with the built-in rod antenna,

poor.

 

try placing your TV near a window or connecting an

 

external antenna to the TV to improve reception.

 

 

 

 

 

There is no sound

 

• Reinsert the headphone plug into the jack.

when using

 

• Increase the volume level.

 

 

 

headphones.

 

 

 

 

 

 

 

 

Specifications

 

 

 

 

 

Signal system

NTSC and ATSC

 

 

 

 

 

 

Panel size

7-inch

 

 

 

 

 

 

Power source

DC 9V

 

 

 

 

 

 

Operating temperature

41°~95°F (5°~35°C)

 

 

 

 

 

 

Weight

0.588 kg

 

 

 

 

 

 

Dimensions (W x D x H)

185 x 147 x 32mm

 

 

 

 

 

 

Legal notices

FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced technician for help.

Canada ICES-003 statement

This Class B digital apparatus complies with Canadian ICES-003.