4

OSD menu

OSD menu

To access the OSD menu:

1Press MENU on the remote control.

2 Press the

to select a setting, then press ENTER.

3Press MENU to exit.

Clock menu

OSD Duration

Set the duration of the on-screen display:

 

5, 10, 15, or 20 seconds

 

 

Sleep Timer

Set to turn the TV off automatically: 5, 10,

 

15, 30, 45, 60, 90, 120, 180, 240 minutes, or

 

OFF

 

 

Time zone (DTV only)

Select your time zone

 

 

Daylight savings time

Turn Daylight Savings On or Off

(DTV only)

 

 

 

Setup menu

Language

Select English, Spanish, or French

 

 

Transparent

Make the menu transparent

 

 

Closed Caption (DTV

Select a closed caption option

only)

 

 

 

Zoom Mode

Select Auto, Wide, Zoom, or Cinema

 

 

Restore Setting

Reset settings to factory default

 

 

Channel setup menu (TV only)

Antenna

Select a reception method: Air or CATV (cable)

 

 

Auto Scan

Perform a channel scan to save to memory. Erases

 

previously saved channel information.

 

 

Auto Scan

Perform a channel scan to save to memory without

Add CH

erasing previously saved channel information.

 

 

Channel

Set the TV to skip specific channels found during

Skip

auto scan.

 

 

Channel NO

Changes the channel, while in Menu mode.

 

 

Channel

Lets you edit the program label that appears when

Label

a channel is selected. DTV automatically adds this

 

information. You can manually edit it for ATV.

 

 

WARNING: The TV will not work when it is moving.

Setting up the TV

Connecting power

To connect power:

1Plug into one end of the power adapter into the DC Input jack on the right side of the TV.

2Connect the other end into a power outlet.

3 Troubleshooting

Charging the battery

The TV has a built-in rechargeable battery (Lithium-Polymer). The TV can operate up to 100 minutes with the built-in battery. Charge the battery prior to first use. Recharge the battery when the built-in battery fails to power the TV and when the sound level lowers or the picture becomes unstable.

NOTE: The battery will not charge when using the car power adapter.

To charge the battery:

1Connect one end of the AC to the DC Input jack on the right side of the TV.

2Connect the other end to a power outlet.

3Press POWER on the TV to turn the TV off. The charge indicator turns red.

4Disconnect the AC when the charge indicator turns off.

Scanning for channels

Scan for available analog and digital channels to create the channel list using the CH+ and CH- buttons.

To scan for channels:

1Press POWER on the TV to turn on your TV.

2 Press INPUT to set the input mode to TV. 3 Press MENU. The MENU screen opens.

4 Press

twice to access the Channel Setup menu.

5Press to select AutoScan. The TV beings to scan for available channels. Pause the scan by pressing and holding MENU.

6Press MENU to exit the menu when the scan is complete.

Selecting analog or digital channels

You can select specific analog or digital TV stations using your remote control.

To select an analog station:

•Enter the channel number followed by -0 (for example 11-0 for analog channel 11). If available, the analog channel is displayed.

To select a digital station:

•Enter the channel number followed by -1 (for example 11-1 for digital channel 11). If available, the digital channel is displayed.

NOTE: Some digital stations provide multiple broadcasts on a single channel. To access these channels directly enter higher numbers after the channel number (for example 11-2 or 11-3. for digital channel 11). If available, the digital channels appear.

Connecting an A/V device

You can connect your TV to an A/V device such as a VCR or DVD player to enjoy high quality stereo sound and picture.

To connect an A/V device:

1Connect the black end of the supplied audio/video cable to the AV In jack on the right side of the TV.

2Connect the other end of the cable to the AV OUTPUT jacks on the A/V device, making sure to match the color coding.

3Press INPUT and choose AV IN.