DX-EHB4.fm Page 2 Friday, April 29, 2005 4:14 PM
2Dynex DX-EHB4 Network Hub
Dynex DX-EHB4 Network Hub
10Base-T Ethernet Hub
This hub features plug-and-play connections and easy installation.
Setting up your hub
To set up your network hub:
1Place your hub in a well-ventilated area.
2 Don’t place heavy objects on the hub.
3Connect the AC power adapter to the hub, then plug the adapter into an AC power outlet.
4Connect the network cables as shown in the following diagram:
Interpreting the LEDs
Power—Indicates that the hub has power.
Collision—Blinking indicates that data collisions are occurring on the network. Collisions occur when two networked computers send data at the same time. If this LED blinks frequently, it means network traffic is heavy, and you should con- sider adding a bridge or hub to reduce collisions.
