15 |
Maintaining
Replacing the remote control battery
To replace the battery:
1Release the battery by inserting the tip of a pen or similar tool into the small hole at the top right of the battery compartment.
2Push the pen /tool into the mechanism, then slide it toward left and hold it.
3Pull the battery compartment out from the bottom.
4Take out the used battery and replace it with a new one.
5Push the battery compartment back into the remote control.
Troubleshooting
No video/ audio/ image | • Make sure that your iPod/iPhone is on the compatible list in |
on TV | the Specifications on page 11. |
| • Make sure that your video cable is connected firmly and |
| correctly between the TV and your iPod dock |
| • Make sure that your monitor is turned on and the video |
| channel is correct |
| • Make sure that the video format is correct - NTSC / PAL |
|
|
No audio with speakers | • Make sure the AV cable is connected firmly and correctly |
|
|
The remote control isn't | • Make sure you pulled the plastic tab if this is a first use |
working | • The battery could be dead, replace it |
| • Make sure you are aiming at the remote sensor on the front |
| of the dock |
|
|