Installing the modem driver

After your computer starts, you must install the driver. See the section “Installing the modem driver” on page 3.

Installing the modem driver

(Windows Vista/Windows XP/Windows 2000)

Note: Your computer may differ slightly from these images.

To install the modem driver:

1When your computer starts, the Found New Hardware Wizard opens automatically (this may not appear on Vista systems; continue to step 3).

2Click Cancel.

3Insert the DX-M102 CD into your CD or DVD drive. The Dynex PCI Modem window opens automatically.

4 Click Install Driver.

5The driver is installed.

3

6Click OK, then EXIT to close the Dynex PCI Modem window.

Troubleshooting

For troubleshooting information, see your user guide located on the Dynex CD.

To verify the installation is correct

1Open the Windows Control Panel and double click the Phone and Modem Options icon. You may need to switch to Classic View.

2Click the Modems tab, then select Dynex DX-M102 SM56kb Data Fax Modem and click Properties.

3Click the Diagnostics tab.

4 Click Query Modem.

5Within a few seconds a window will appear with the modem responses to various AT commands issued to it. When this happens, the modem software is properly installed and functioning correctly.