
20 | Setting up your wireless network adapter |
WPS uses WPA2 for encryption. It does not provide additional security, but standardized the method for securing your wireless network. On your client utility,
1Push and hold the WPS button (located on the back of your router) for three seconds. Initiate the WPS procedure on the client utility within two minutes.
2Open the WNU and select the network name, then click Connect. Your client automatically exchanges security information and is added to your wireless network. You can also initiate the PBS method from the client side.
To use the PIN method:1Open the WNU and select the2Choose the PIN method option, then complete the WPS procedure on your router. Your client is automatically enrolled in your wireless network within two minutes.
To enable security, you will first need to determine which standard is used by the router. (See your wireless router’s guide for directions on how to access the security settings.)
To access the security settings on your card:1Open the WNU.
2Click the My Connections tab, then click the connection you want to change.3Click Edit, then click Advanced to change settings.
To access the security settings on your network adapter, click the My Connections tab and point to the connection for which you want to change security settings. Click Edit to change settings.
Setting up WEP
To set up1Select OPEN from the Network Authentication menu on the Wireless Network Properties tab on the Edit information for a network page.
2Select WEP from the Data Encryption menu.