22 | Maintaining your TV |
Changing TV settings
To change the TV settings:
1Press MENU. The main (Video) menu opens.
Picture Mode |
| Normal |
|
Contrast |
|
| 50 |
Brightness |
|
| 50 |
Saturation |
|
| 50 |
Hue |
|
| 0 |
Sharpness |
|
| 4 |
Color Temperature |
| Natural |
|
Noise Reduction |
| Medium |
|
Video | Enter | Select | Exit |
2Press 
or 
to select the TV menu icon. The TV menu opens.
Channel Scan
Tuner ModeCable
Channel Skip
Favorite List
TV | Enter | Select | Exit |
3Press 
or 
to select the option you want to change or the
•Channel
•Tuner
•Channel
to select the channels you want, then press ENTER repeatedly to hide (with a check mark in the box), or show (without a check mark) the channel. Repeat as necessary.
•Favorite
to select the channels you want on your favorite list, then press
ENTER to show (with a check mark in the box), or hide (without a check mark) the channel. Repeat as necessary.
4Press 
or 
to change the setting of the selected option.
5 Press EXIT to close the menus and return to normal viewing.
Maintaining your TV
Careful and regular cleaning can extend the amount of time you can enjoy your new TV.
Caution
Make sure that you turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the screen
Wet a soft cloth in a mixture of luke warm water and a little fabric softener or dishwasher detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
Make sure the excess water is off the screen, and then let it air dry before you turn on your TV.
Cleaning the cabinet
Wipe the front panel and other exterior surfaces of your TV with a soft, dry,
Troubleshooting
Operation
| Problem | Solution |
|
|
|
| Remote control | • Remove obstacles between the remote control |
| does not work | and the player. |
|
| • Point the remote control at your TV’s IR sensor. |
|
| Install fresh batteries. |
|
|
|
| Power turns off | • Make sure that the sleep timer is not set. |
| suddenly | • Check the power control settings. |
|
|
|
Video problems | ||
Problem | Solution |
|
|
No picture or | • Check all cable connections. |
sound | • Make sure that your TV is turned on. |
| • Try another channel. It may be a broadcast |
| problem. |
| • Check your antenna connection, location, or |
| direction. |
| • Make sure that the power connection is okay. |
| Check the wall power outlet. |
|
|
Picture appears | • It is normal for the image to be muted during |
slowly when | the startup process. If the picture does not |
your TV is turned | appear after five minutes, call your Insignia |
on | service center. |
| |
|
|
Picture is | • Check the volume level and mute setting. |
satisfactory, but |
|
no sound |
|
|
|
No color, poor | • Check the picture control and adjust color. |
color, or poor | • Make sure you have provided a sufficient |
picture | distance between the TV and VCR. |
| • Try another channel. The problem may be the |
| broadcast. |
| • Make sure the video cables are connected |
| correctly. |
| • Check the power saving feature and restore the |
| brightness of your TV. |
| • Check the program's color features. The |
| problem may be that it is a black and white |
| movie. |
|
|
Poor reception | • Check the antenna and its connection. If there |
on some | are problems, correct them. If all connections |
channels | are tight, the problem may be with a faulty |
| antenna or cable. |
| • The station or your cable TV provider may be |
| experiencing problems. |
| • Check for sources of interference. |
| • |
|
|
Stripes or bars on | • Check for interference from other electronic |
picture | devices, such as radios and televisions, and |
| keep magnetic or electronic devices away from |
| your TV. |
| • Check your antenna connection, location, or |
| direction. |
|
|