Specifications | 23 |
Audio problems
Problem | Solution |
|
|
Picture okay, but | • Press the volume control to increase the |
no sound | volume. |
| • Press MUTE to make sure that your TV is not |
| muted. |
| • Try another channel. The problem may be with |
| the broadcast. |
| • Make sure that the audio cables are installed |
| correctly. |
|
|
No output from | • Adjust the balance in the AUDIO menu. |
one of the |
|
speakers |
|
|
|
Unusual sound | • A change in ambient humidity or temperature |
from inside the | may result in an unusual noise when the |
TV | product is turned on or off. This does not |
| indicate a fault with the product. |
PC mode problems
|
| Problem |
| Solution |
|
| |
|
|
|
|
|
|
|
|
|
| The signal is out | • Adjust the resolution, horizontal frequency, or |
| |||
|
| of range |
| vertical frequency. |
| ||
|
|
|
|
| • Check the input source. |
| |
|
| Vertical bar or |
| • Adjust the clock, phase, or horizontal/vertical |
| ||
|
| stripe on the |
| position, or try Auto to configure these options. |
| ||
|
| background, |
|
|
|
| |
|
| horizontal noise, |
|
|
| ||
|
| or incorrect |
|
|
|
| |
|
| position |
|
|
|
| |
|
|
|
|
|
|
|
|
|
| The screen color | • Check the signal cable to make sure that it is |
| |||
|
| is unstable or a | connected correctly. |
| |||
|
| single color |
| • Reinstall your PC’s video card. |
| ||
|
|
|
|
|
|
|
|
|
| Specifications |
|
| |||
|
|
|
|
|
| ||
| Plasma panel | Panel size |
| ||||
|
|
|
|
|
|
| |
|
|
|
| Aspect ratio | 16:9 |
| |
|
|
|
|
|
|
| |
|
|
|
| Brightness | 1500 cd/m2 |
| |
|
|
|
|
|
|
| |
|
|
|
| Contrast ratio | 10,000:1 |
| |
|
|
|
|
|
|
| |
|
|
|
| Max. resolution | 1024 × 768 |
| |
|
|
|
|
|
|
| |
|
|
|
| Maximum colors | 16.7 million |
| |
|
|
|
|
| |||
| Input | Video/Audio (L/R) in | 2 |
| |||
| connector |
|
|
|
|
| |
|
| 1 |
| ||||
|
|
|
|
| |||
|
|
|
|
|
|
| |
|
|
|
| YPbPr/Audio (L/R) | 2 |
| |
|
|
|
|
|
|
| |
|
|
|
| VGA/Audio (L/R) | 1 |
| |
|
|
|
|
|
|
| |
|
|
|
| HDMI/Audio (L/R) | 2 |
| |
|
|
|
|
|
|
| |
|
|
|
| Audio out (L/R) | 1 |
| |
|
|
|
|
|
|
| |
|
|
|
| Optical | 1 |
| |
|
|
|
|
|
|
| |
|
|
|
| Headphone | 1 |
| |
|
|
|
|
|
| ||
| Power source |
|
|
| |||
|
|
|
|
|
| ||
| Power |
|
| 310 W |
| ||
| consumption |
|
| Standby <1 W |
| ||
|
|
|
|
|
| ||
| Dimensions |
|
| 41.26 × 28.5 × 10.7 inches |
| ||
|
|
|
|
|
| (1048 × 724.4 × 272 mm) |
|
|
|
|
|
|
| ||
| Weight |
|
| 51.81 lbs. (23.5 kg) |
| ||
|
|
|
|
|
|
|
|
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced technician for help.