
Advanced setup | 11 |
3Press the OPEN button to close the disc tray. The player starts playing the disc.
4 Turn the VOLUME knob to adjust volume (even when using headphones).
If the player is connected to a TV or an amplifier, adjust the volume on the connected device.
5Stop playback by pressing the STOP button on the player or remote control.
Pausing discs
To pause a disc:
1When playing a disc, press (play/pause) to pause playback.
2 Press (play/pause) again to resume playback.
Removing discs from the player
To remove a disc from the player:
1Press the OPEN button to open the disc tray, then remove the disc.
2 Press the OPEN button to close the disc tray, then turn off the player.
Using with headphones
You can also use the player with headphones (optional) by plugging the headphones into the headphone jack on the left side of the player. Plugging headphones into the headphone jack disables the internal speakers.
Warning: To avoid damaging your hearing, set the volume to a low level before putting on the headphones, then adjust the volume up to a comfortable level.
Advanced setup
Making optional connections
DC 9V CHG AV OUT | VOL | OFF ON |
Video - Yellow
Audio (L) - White
Audio (R) - Red
Connecting to a TV or another monitor
To connect to a TV or another monitor:
•Connect black
•Connect the yellow plug to the VIDEO IN jack on the TV.
•Connect the red plug to the AUDIO IN R jack on the TV.
•Connect white plug to the AUDIO IN L jack on the TV.