Setting up the television
No. | Button | Description |
|
|
|
4 | SLEEP | To set the television to turn off after |
|
| a preset amount of time, press the |
|
| SLEEP button. The clock counts up |
|
| ten minutes each time the button is |
|
| pressed in the order of 0, 10, |
|
| 20...100, 110, 120 minutes. After the |
|
| sleep time is programmed, the |
|
| display disappears then reappears |
|
| momentarily every ten minutes to |
|
| remind you the sleep timer |
|
| function is operating. To confirm |
|
| the sleep time setting, press the |
|
| SLEEP button once and the |
|
| remaining time is momentarily |
|
| displayed. To cancel sleep time, |
|
| press the SLEEP button repeatedly |
|
| until the display turns to 0. |
|
|
|
5 | VOL + / - | Press the + button to increase the |
|
| volume level. Press the - button to |
|
| decrease the volume level. Use |
|
| these buttons to select the desired |
|
| setting during the menu screen |
|
| operation. |
|
|
|
6 | MENU/ENTER | Press to display the menu screen |
|
| function. |
|
| Press to enter or select operations |
|
| during operation of the menu |
|
| screen. |
|
|
|
7 | EXIT | Press to remove the menu screen. |
|
|
|
8 | INPUT | Press this button to display the |
|
| SOURCE SELECTION menu to |
|
| select the video input source. |
|
|
|
9 | RECALL | Press this button to go back to the |
|
| previously viewed channel. Press |
|
| this button again to return to the |
|
| channel you were watching. |
|
|
|
10 | MUTE | To turn off the sound, press this |
|
| button once. The television is |
|
| silenced and the symbol MUTE |
|
| appears on the screen. The muting |
|
| feature can be turned off by |
|
| pressing the MUTE button again or |
|
| one of the VOL + or - buttons. |
|
|
|
11 | CH + / - | Press the CH + (up) button to change |
|
| to a higher numbered channel set |
|
| into memory. Press the CH - (down) |
|
| button to change to a lower |
|
| numbered channel set into |
|
| memory. Use to select the desired |
|
| setting during menu operation. |
|
|
|
12 | ZOOM | Press this button to change the |
|
| picture size. |
|
|
|
13 | AUDIO | Press this button to select the |
|
| desired sound. |
|
|
|
14 | CCD | Press this button to display the |
|
| CLOSED CAPTION menu. |
|
|
|
15 | TUNER | Press this button to select the |
|
| analog/digital mode. |
|
|
|
5
Setting up the television
Connecting your television to AC power
Use the AC polarized cord provided for operation on AC. Insert the AC plug into a standard 120V 60 Hz polarized AC outlet.
AC outlet
Wider hole and blade
Polarized AC plug (one blade is wider than the other.)
Notes:
Never connect the AC plug to other than the specified voltage (120V 60 Hz). Use the attached power cord only.
If the polarized AC cord does not fit into a
If you cause a static discharge when touching the television and the television fails to work, unplug the television from the AC outlet, then plug it back in. The television should work normally.
Installing batteries in the remote control
Before using the remote control, you must install batteries. Use two AAA size batteries. The batteries may last about one year depending on how much the remote control is used. For best performance, we recommend the batteries should be replaced on a yearly basis, or when the remote operation becomes erratic. Do not mix old and new batteries or different types.
To install batteries in the remote control:
1Open the battery compartment cover.
2Install two AAA batteries.