Dynex DX-TVM111 10 , You l l n ee d

10 Installation instructionsDX-TVM111

STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed

backs

1Align the TV bracket (A) with the screw holes on the back of the TV.

2Place spacers (F) behind the TV bracket and the washers (E) over the holes in the TV bracket, then insert the

screws (D) through the washers, TV bracket, and spacers.

NOTE: If the hole pattern on your TV is 75 mm x 75 mm, do not use the washers (E).

3Tighten the screws until they are snug against the TV bracket. Do not over tighten.

You ’l l n ee d

E (4)

D (4) Phillips screwdriver

Screws Washers Spacers

F (4)

TV bracket (A)

DX-TVM111_12-1055_MAN_V1_ENG - GIF.fm Page 10 Friday, March 22, 2013 4:12 PM

Contents

Main DX-TVM111 TV Wall Mount ASSEMBLY GUIDE 2 Safety information and specifications CAUTION: Tools needed Package contents 3 Package contents TV Hardware Bag ABJ Installation instructions STEP 1 - Determine wall-mount location You l l n e ed Installation instructions 5 STEP 2 - Option 1: Installing on a wood stud* wall Note: Any wallboard or material covering the wall must not exceed 5/8" (16 mm). CAUTION: DO NOT over-tighten the lag bolts (G). STEP 2 - Option 2: Installing on a solid concrete* or concrete block wall CAUTION: directly onto the concrete surface. CAUTION: DO NOT over-tighten the lag bolts (G). STEP 3 - Determine whether your TV has a flat, irregular, or obstructed back STEP 4 - Select screws, washers, and spacers CAUTION: STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back 10 STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs You l l n ee d STEP 6 - Mounting the TV to the wall plate