1080p Upconvert DVD Player | 23 |
Cleaning discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or
Note: Never operate this player immediately after moving it from a cold location to a warm location. Leave it for two or three hours without operating it. If you use this product in such a situation, it may damage discs or internal parts.
Resetting your player
Reset your player if you observe any of the following symptoms:
•When your player is plugged in, but the power will not turn on or off.
•When the display window is not working.
•When your player does not operate normally.
To reset your player:
•Unplug the power cord for 30 minutes, then plug in the power cord again. This should reset your player.
Specifications
System and outputs
VF Signal system | NTSC |
|
|
|
|
Frequency response | CD: 20 Hz~20 KHz (EIAJ) |
|
| DVD: 20 Hz~44 KHz (96 KHz)(Sample result) | |
| 20 Hz~22 KHz (48 KHz)(Sample result) | |
|
|
|
Audio S/N ratio | > 90 dB |
|
|
|
|
Audio | MPEG LAYER2 standard |
|
|
|
|
Audio output (analog audio) | Electric level output: 1.8 ± 0.2 V | Resistance: 10 Kohm |
|
|
|
Audio output (digital audio) | Electric level output: 0.5 V | Resistance: 75 ohm |
|
|
|