22

DX-UPDVD2

Troubleshooting

Check the following guide for the possible causes and solutions for a problem before contacting the nearest service center or dealer for repairs.

14

Symptom

Solution

 

 

No power

Make sure that the DVD player is plugged in and that the AC power connection is

 

secure.

 

 

No picture

• Make sure that the connection between the DVD player and the TV is secure.

 

• Make sure that the TV is in good working condition.

 

• Press the RESOLUTION button repeatedly until the picture returns to normal.

 

 

No sound

• Make sure that the connection between the player and other devices is secure.

 

• Make sure that the TV and amplifier are in good working condition and setup

 

correctly.

 

 

DVD will not play

• Make sure that the disc is correctly inserted.

 

• Clean the disc.

 

 

The remote control does not

• Remove obstacles between the remote control and the player.

work

• Aim the remote control at the sensor on the front panel of the player.

 

• Check the batteries and replace them if necessary.

 

 

Picture is distorted

• Check the disc for dirt and scratches. Clean or replace the disc.

 

• Unplug the player, wait ten seconds, then plug it back in and turn it on.

 

 

The control buttons on the

• Power surges or other electrical phenomena may have disabled the buttons.

player do not work

• Unplug the player, wait ten seconds, then plug it back in and turn it on.

 

 

Maintaining

Care and handling of discs

Handling discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.

Storing discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.