2

DX-WLOM2 Wireless Optical

Mouse

Important safety instructions

•Batteries may explode or leak if they are improperly recharged, inserted, disposed of in fire, or mixed with used or different battery types.

•There is a risk of explosion if a battery is replaced by an incorrect battery type.

•Dispose of used batteries according to local regulations.

Contents of the package

The following items are in this package:
•Wireless optical mouse
•Radio Frequency: 27MHz
•Channels: 2
•Changeable Ids: 256
•USB receiver
•User guide
•2 AA batteries
•Mouse driver CD

Setting up the mouse

This mouse uses a Smart Link. After you have finished linking the mouse and receiver, you won't need to re-link the mouse, even if you change the batteries or restart your computer.

Installing the hardware
Notes:
•Radio Frequency: 27MHz, 2 channel, 256 changeable IDs

•The mouse and receiver should be located no further than 3 feet (1 meter) apart.

•After you press the receiver's Link button, you must complete the mouse link process within fifteen seconds.

To install the receiver:
1Turn on the computer.
2Plug the USB cable into your computer’s USB port.
To select the mouse channel and install the batteries:

1Find the two-channel switch located either at the back of the wireless mouse or inside the battery compartment.

Important safety instructions

Channel switch

2Select either channel 1 or 2.
3Install the batteries into the battery compartment.
To link the mouse with the receiver:

1Press the ID Link button on the receiver. You have fifteen seconds to complete the mouse link process.

2Press the ID Link button on the mouse. The mouse is linked with the receiver, and the receiver’s LED indicator turns off.

3If the mouse does not link with the receiver, repeat Steps 1-2.

Each channel has 256 changeable IDs. If you discover that the channel or ID you selected is interfered by other nearby wireless mouse users, change the Link ID by changing the channel and re-linking the mouse.

Installing the software
To install the driver:
1Insert the enclosed CD into your computer’s disc drive.
2 Follow the on-screen instructions to install the driver.

3Restart the computer. A Mouse Setting icon appears on the Windows task bar after you successfully finish the installation.

To uninstall the driver:
1Click the Add/Remove Programs icon in the Control Panel.
2 Click the mouse driver.
3 Click Remove.

Using the mouse

Using the Universal Scroll Wheel

The Universal Scroll Wheel is designed for four-way navigation. You can view whole documents by turning the scroll wheel up, down, left, and right.

Saving power
You can turn off the optical sensor to extend your battery life.
To turn off the optical sensor:

1Press and hold middle of the scroll wheel, then press the Connect/Link button on the bottom of the mouse. The optical sensor turns off.

2To turn the sensor back on again, perform the same actions.