16832_CAN_DC14_OPS_MAN_WARR 31/5/07 13:12 Page 11
Finding blockages
CAUTION
•Turn power off and unplug before checking for blockages. Failure to do so could result in electric shock or personal injury.
•If any part of your machine becomes blocked, it may overheat and then automatically shut off. Unplug machine and leave to cool down.
•Please note: Clearing blockages is not covered by your machine’s limited warranty, please call the Dyson Helpline on
DC14 wand
A
D
B
C
Finding blockages
•Beware of sharp objects when clearing blockages.
•Refit all parts of the machine before using it.
•If you hear a loud rachet noise it means the brushbar is obstructed.
•Disconnect the machine before removing the obstruction.
Check tools are clear of blockages.
Release wand from vacuum
A Remove wand by pressing hose button and sliding hose off wand. Check inside wand and hose for blockages.
B Press hose release button at front of machine and slide hose out with lower cord hook at rear.
U bend inspection
C Tilt machine forward, slide out U bend and check inside for blockages.
Airway inspection
D Squeeze valve release buttons and check inside for blockages.
www.dyson.com
11
