Dyson DC14 Changing/fitting the belt

Important safety instructionsImportant safety instructions
Dyson Helpline contact us at
1
-866-693-9766
16
Changing/fitting the belt
Remove wand and turn
machine upside down.
Changing/fitting the
belt
CAUTION
•Turn power off, unplug
machine and allow
machine to cool for 1
hour before changing/
fitting belt. Failure to do
so could result in electric
shock or personal injury.
•Ensure soleplate is in
correct position before
use.
•Make sure all parts have
been replaced securely
before using your
machine.
AUndo fasteners using a
coin, slide back end caps
and remove soleplate.
BRemove dirt or debris and
check spindle is clean.
CTo replace the belt,
remove the brushbar, loop
belt around brushbar and
feed through hole.
DCheck end caps are in
place.
A
B
C
D
A10480_DC14_USA_OWNER_MAN.q… p1 6/3/04 1:12 PM Page 12