E&J EJ777-2 manual Troubleshooting, Symptom

7 TROUBLESHOOTING

Continual use of your Transport Chair necessitates maintenance, especially if the factory-set adjustments have been altered. The following troubleshooting guide lists several common problems that may occur, and offers corrective actions for each. If you are unsure of the solution or unable to diagnose the problem, do not hesitate to ask your Graham-Field dealer for assistance.

	SYMPTOM
looseness in transport chair	squeaks / rattles	caster flutter	sluggish turning	chair veers left	chair veers right
						PROBABLE CAUSE AND
						CORRECTIVE ACTION
						Nuts and/or bolts may be loose. If so, tighten.
						Bolts should be snug.
						Rear wheels and/or casters may be adjusted
						improperly. Ensure that both casters
						are mounted in identical positions.
						Casters or stem(s) may be adjusted improperly.
						Have your GF dealer correct adjustment.

Note: Use only Everest & Jennings replacement parts. A Transport Chair replacement parts list is available at www.grahamfield.com to assist in the ordering of parts.

CAUTION: A complete inspection of your Transport Chair, including mainte- nance, servicing and safety checks, should be performed by a Graham-Field dealer at least once every six months.

WARNING: Unauthorized modification or the use of non-Everest & Jennings replace- ment parts could change the structure of the Transport Chair, void the warranty, and create a hazardous condition, which could result in serious personal injury.

EJ777-2-INS-LAB-RevA10 • EJ777-2 Transport Chair 23