Warning: Do not use battery chargers not supplied by Graham-Field. Battery char- gers not supplied by Graham-Field could damage the controller and the battery charger. Electrical arcing could result, which could cause severe personal injury, explosion, and fire.

Charging the Batteries

Note: Before charging the batteries, read the rest of this manual, especially the Battery Charger sec- tions.

Note: As a safety feature, the wheelchair is inoperable during charging.

1.Ensure that power to both wheelchair and battery charger is OFF.

2.Connect the battery charger output connector to the wheelchair battery charger receptacle.

3.North America: Plug the battery charger AC connector into a properly grounded, 115 volt, 60 cycle single phase power outlet. If you are not in North America, check that the battery charger AC voltage switch is set on the appropriate voltage for your location.

4.Place the battery charger power switch in ON position. The battery charger’s power indicator LED will illuminate red, the charge indicator LED will illuminate yellow, and the fan will begin to run.

5.The charge indicator LED batteries are nearly finished will change to non-flashing

may appear to flicker or alternate between green and yellow when the charging, and the fan may go on and off. The charge-indicator LED green when the batteries are fully charged.

Allow adequate time to bring the batteries up to a full charge—the actual time required to recharge the batteries will depend on discharge condition. The charger supplied with the wheel- chair is automatic, and will not damage the batteries if left connected after batteries are fully charged.

6.When batteries are fully charged, place battery charger power switch in the OFF position.

7.Remove battery charger cable connector from receptacle.

Note: If you have any problems charging the batteries, see Troubleshooting, battery charger in the TROUBLESHOOTING section. Identify the symptom and follow the steps in order. If you are unable to resolve the problem, contact your Graham-Field dealer.

 

 

 

Metro Power III Owner’s Manual

GF0600059RevB06, November 2006

25

Page 24 Page 26
Page 25
Image 25
E&J GF0600059REVB06 manual Charging the Batteries
Page 24 Page 26

GF0600059REVB06 specifications

The E&J GF0600059REVB06 is a cutting-edge technology device that has garnered attention in the market due to its myriad features and robust performance characteristics. This product is designed for versatile applications, offering enhanced efficiency and convenience for users across different sectors.

One of the standout features of the E&J GF0600059REVB06 is its advanced performance capabilities. The device is powered by a high-efficiency processor that not only ensures rapid data processing but also incorporates energy-saving mechanisms. This allows the device to perform complex tasks without consuming excessive power, making it an eco-friendly option for users mindful of their energy consumption.

Equipped with state-of-the-art connectivity options, the E&J GF0600059REVB06 allows seamless integration into existing systems. It supports various communication protocols, which facilitate quick data transfer among devices. Whether connecting to a local network or the cloud, users will appreciate the flexibility this functionality offers for both personal and professional applications.

In terms of design, the E&J GF0600059REVB06 exhibits a sleek and ergonomic appearance that is both aesthetically pleasing and functional. Its compact size makes it suitable for spaces where area is limited, allowing for easy placement without sacrificing performance. Additionally, the device is built from durable materials, ensuring longevity and reliability, even in challenging environments.

The user interface of the E&J GF0600059REVB06 is another highlight. Designed with user-friendliness in mind, it features intuitive navigation that allows users to easily access various functions and settings. This simplicity ensures that even users with limited technical knowledge can operate the device efficiently.

Safety and security are paramount in the design of the E&J GF0600059REVB06. The device incorporates multiple layers of security features, protecting it from unauthorized access and data breaches. These include encryption technologies and user authentication protocols, ensuring that sensitive information remains confidential.

Overall, the E&J GF0600059REVB06 stands out in the market as a reliable, feature-rich device that meets the needs of modern users. Its blend of advanced technology, user-oriented design, and robust security features makes it an excellent choice for anyone seeking an efficient solution for their technological requirements. As such, it has become a preferred option in its category, appealing to a wide range of consumers and professionals alike.
Top Page Image Contents