69
Speed and Distance Log Units of Measure The speed and distance log can be displayed in statute miles (MPH),
Nautical miles (knots), or Metric (kilometers per hour) if a speed sensor
is attached. To change the unit of measure, press MENU DOWN until the
SYSTEM menu appears. Press UP ARROW, then press MENU until the
SPEED/LOG menu appears. Use the arrow keys to select the desired
measurement unit, then press PWR to clear the menu.
Speed menu.
Reset Distance Log You can reset the distance log to zero with this command. Press MENU
DOWN until SYSTEM appears, then press UP ARROW. Press MENU until
the RESET LOG menu appears. Press UP ARROW and the log returns to
zero. Press PWR to clear the menu.