Eagle Electronics 2T

To turn Fish I.D. on, press MENU until the FISH ID menu appears. Press

UP ARROW to select ON, then press PWR.

To turn off the fish alarm without turning off fish symbols, press MENU

DOWN until FISH ALARM appears. Press DOWN ARROW to select OFF, then

press PWR to clear the menu. Repeat the above steps to turn the alarm

back on, but press UP ARROW to select ON before clearing the menu.

Fish Alarm menu.

Depth Alarms

The depth alarms are triggered only by the bottom signal. No other

echoes will activate these alarms. The depth alarms consist of a shallow

and a deep alarm. The shallow alarm sounds an alarm tone when the

bottom goes shallower than the alarm's setting. The deep alarm sounds

a tone when the bottom goes deeper than its setting. Both alarms ad-

just the same way, although through different menus.

Shallow Alarm

To set the shallow alarm depth, press MENU DOWN repeatedly until

SHALLOW ALARM appears.

Shallow Alarm menu.