Eagle Electronics 320 manual Save Dataent

Models: 320

1 128
Download 128 pages 61.27 Kb
Page 56
Image 56

To transfer data from the MMC to the IntelliMap 320: press → to LOADENT.

3.Saving to MMC: To accept the default name "Data" for the GPS Data File, press ↓ to SAVE DATAENT. If you wish to rename the file (as

shown in the following figures), press ENT to activate the selection box. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the name is correct. Then, press ENT↓ to

SAVE DATAENT.

The IntelliMap 320 will display first a progress then a completion mes- sage when the data transfer is finished. To return to the Page view, repeatedly press EXIT.

From left to right, these figures show the menu sequence for naming and saving a GPS Data File from the IntelliMap 320's memory to an MMC.

4.Loading to unit memory: There may be more than one GPS Data

File (*.USR) on the card. To select a file, press ENT to activate the selec- tion box, use ↓ or ↑ to highlight the file, then press ENT to accept the selection. Next, press ↓ to LOADENT. The IntelliMap 320 will display a completion message when the data transfer is finished. To return to the Page view, press EXITEXITEXITEXIT.

50

Page 56
Image 56
Eagle Electronics 320 manual Save Dataent