Eagle Electronics Z-9500

tion to waypoints and routes are cancelled. Now

press

the

key adja-

cent to the Preset label to continue. The screen will clear and the

message "System Powering Up. Please Wait" may appear

for a few

seconds. Then the Z-9500 will start scrolling echoes across the

screen, and all features will return to their

factory settings.

The memory function can be turned off by pressing the MENU key,

then pressing

the

key adjacent

to the "More" label thre times. Next,

press

the key adjacent

to the "Bat. Backup Off" label. If you wish to

turn the

Battery Backup feature on again, press

the MENU key, then

press

the

key adjacent

to the "More" label three times. Now

press

the

key adjacent to the "Bat. Backup

On" label.

FISH ARCHES

Fish arches are created when the

cone of sound passes

over a fish.

The distance to a fish when the cone first strikes it is shown as "A"

below. When the center of the cone strikes the fish, the distance is

shorter as shown "B". As the cone leaves the fish, the distance

increases again

as shown in "C".

When the Fish l.D. mode is off, the

depth of the water

will affect the

size and shape of the fish arch due to the cone angle

diameter. For

example, if the cone passes

over a fish in shallow

water, the signal

displayed

on the Z-9500

may

not arch at all. This is due to the

narrow

cone diameter

and the resolution limitations of the

display.

Very small fish

probably

will not arch at all. Medium sized fish will show

a partial arch, or a shape

similar to an arch if they're in deep water.

Large fish will arch, but turn the

sensitivity up in deeper

water to see

the arch. Because of water

conditions,

such as heavy

surface clutter,

thermoclines, etc., the sensitivity sometimes cannot be increased

enough

to get fish arches.

The Z-9500

will show navigation information to each of the

waypoints in

the route. As you come within the arrival alarm's radius of each

waypoint,

the Z-9500 will automatically switch to the next

waypoint on

the list. This continues until you've

travelled the entire route.

Canceling a Route

To stop

the Z-9500 from

navigating a route,

press

the MENU key, then

press the key adiacent to the "More" label. Now

press

the

key adjacent

to the "Route Planning" label. Finally, press the key adjacent to the

"Cancel Route" label. The Z-9500 will stop sequencing through the

waypoints on the route. However, it will still show navigation data to the

last

waypoint in use.

Erasing a Route

To erase a route, press the MENU key, then press

the

key adjacent to

the "More" label. Next, press the

key

next to the "Route Planning" label.

Now press the key adjacent to the "Erase Route" label. The screen

shown below

appears.

This is the "Erase Route" selection menu. Choose the route to erase by

pressing the keys adjacent to the "Up"

"Down" labels to move the box

over the desired route name. In the

example below, the route "LONG"

is selected. Press the

key next to the "Enter label to erase the route.

Then select another route to erase or press the key adjacent to the

"Clear' label to exit this

screen.

WARNING !!t

Preset will cancel

Waypo

hit navigation

and Routes.

— Preset

Select Route

I aa

TUNA—i

WRECK 2

DONS COVE

MAR I HA

Down

Erase g

Clear

46 91

PDF compression, OCR, web-optimization with CVISION's PdfCompressor