View and Go To Waypoint
The View and Go To Waypoint menu lets you select the
waypoint you
wish to recall from the list of waypoints. To use this
menu, first press
the Waypoint Recall key, then press the key next
to the "View/Go To
Waypt"
label. The screen shown below appears.
Dest !Jpt:
Enter I
WAYPT ft 2
WAYPT ft 3
WAYPT ft 4
WAYPT ft 5
WAYPT ft 6
WAYPT ft 7
appears on the
display, the problem could be one of three
things;
spark
plugs, alternator, or tachometer wiring. Try using resistor
spark plugs,
alternator
fiRers, or routing
the sonar unit's power cable away from
engine wiring. Again, routing the power
cable directly
to the battery
helps eliminate noise
problems. Make certain to use the in-line
fuse
supplied
with the unit when
wiring the
power
cable to the
battery.
When no noise appears on the sonar unit after all of the above
tests,
then the noise source is probably cavitation. Many novices or persons
with limited experience make
hasty sonar installations which function
perfectly in shallow water, or when the boat is at rest. In nearly all
cases, the cause of the malfunction will be the location and/or
angle
of
the transducer. The face of the transducer must be
placed in a location
that has a smooth flow of water at all boat speeds. Read
your trans-
ducer owner's manual for the best
mounting position.
Seven
waypoints display on this screen. Waypoint
number one's posi-
tion shows at the top of the screen. To recall this waypoint, simply
press
the key
next to the "Enter label. To view other
waypoints, simply
press
the key next to the "Up"
or "Down" labels. This moves the black
box up or down the list of waypoint numbers. When the desired
waypoint
number appears at the
top of the screen, press the key next to
the "Enter" label. The
waypoint displayed at the
top
of the screen will be
recalled arid the Z-9500 will return to the bran screen. To exit from this
screen without recalling a
waypoint, simply press
the
key adjacent to the
"Clear label.
Erase a Waypoint
To erase a waypoint, first press the Waypoint
Recall key. The screen
shown above appears. Next, press
the
keys next to the "Up"
or "Down"
labels until the desired waypoint number appears at the top of the
screen. Now simply press the key next to the "Erase" label. This
instantly erases the position
from the waypoint location. To exit this
screen after
erasing the desired waypoints, press
the key next to the
"Clear label.
86 51
Waypt 8 1
TD1 :40963.60
T02 :85920.22
N 32°00.45'
W 83°11.33'
a
I Down
Clear L
PDF compression, OCR, web-optimization with CVISION's PdfCompressor