Now
simply press the key(s) adjacent to the
waypoint number that you
wish to assign the position. For example, if you want to assign the
position at the
top
of the screen to waypoint number one, press
the
key
next to the "1" label, then press
the
key
next to the "Enter label. U you
wish to save the position under
waypoint nunter 30, press the key next
to the "3", then "0" and finally, "Enter. After pressing the last key, the
Z-9500 returns to the loran screen, saving the position under the
waypoint number you specified.
GO TO WAYPOINT
The Z-9500
gives you
the
option of
entering a
position, then going to the
position without
saving it. To do
this, first press the
Waypoint Save
key.
Next, enter a position using
the "New
Waypoint Position" method. After
entering the position, press the key next to the "More" label until the
screen shown below appears.
Z-9500
LORAN
OPERATION
(REQUIRES OPTIONAL ELC-1 LORAN MODULE)
Saue IJaypoint:
IJiEtypoint
a 1
I
Now press the key adjacent to the "Go to
Waypoint" label. The Z-9500
returns to the loran display showing navigation data to the position you
entered.
WAYPOINT RECALL
You must recall a waypoint to use the Steering or Navigation screens.
To recall a waypoint, first press Waypoint Recall
key. The menu shown
at
the
top of the next
page appears.
If
you already know the
waypoint number you wish to use as a destina-
tion, press the key next to the "Dest.
Waypt. Num" label. If not, press
the
key next to the "View/Go To
Waypt" label.
101 :40965.60
102:85920.22 N 32°0O.45'
W 83°11.33'
WARNING!
USE THIS LORAN RECEIVER ONLY AS AN AID TO
NAVIGATION. A CAREFUL NAVIGATOR SHOULD
NEVER RELY ON ONLY ONE METHOD TO OBTAIN
POSITION INFORMATION.
NOTICE!
MAKE CERTAIN THE LORAN IS DISPLAYING ThE CORRECT
POSITION IN LATITUDE/LONGITUDE
COORDINATES BEFORE NAVIGATING WITH THIS UNIT.
THE POSITION MUST BE CORRECT FOR
THE
NAVIGATION FEATURES TO WORK PROPERLY.
84 53
PDF compression, OCR, web-optimization with CVISION's PdfCompressor