HELPFUL HINTS
1.Evenly control the speed of movement of the spray gun. A fast speed will give a thin coat and a slow speed will give a heavy coat.
2.Only apply one coat at a time. If a further coat is required follow the paint manufacturer’s instructions for drying times.
3.If spraying small areas or objects keep the output setting low as this will avoid excessive use of paints and will minimise overspray.
4.When spraying large areas or objects, it is best to use a
5.Avoid stopping and starting when spraying as this can lead to too much or not enough material on a surface.
6.To ensure edges are covered, commence spraying just to the side of area being sprayed
7.CLEAN SPRAYER AFTER EVERY USE (SEE CLEANING INSTRUCTIONS)
16