Earlex SS200 manual Whats Included Parts List, Set Up

WHATS INCLUDED...

2

9

1

					F G
		4
			3
			E	D	C
		A B
		11
		6			5
		8	7
			10
		PARTS LIST
1	Boiler	6 Vacuum Seal (Spare Part - HF0061)		A	Steam Tube
2	Ceiling Waste Water Collection Tank	7 Foam Filter (Spare Part - HF0063)		B	Steam Plate Vacuum Tube
	(Spare Part - HF0021)	8 Spatula			(Spare Part - HF0086)
3	Main Steam Hose	9 Filler Cap (Spare Part - F13)		C	Vacuum Inlet
	(Spare Part - HF0058)	10 Velcro Straps x 4		D	Steam Outlet
4	Ceiling Waste Water Drainage Hose	11 Hose & Cable Storage Clips		E	Waste Water Outlet Cover
5	Steam plate (Spare Part - HF0026)	(Spare Part - HF0016)		F	Boiler Vacuum Tube
					(Spare Part - HF0092)
				G	Steam Hose Seal (Spare Part - HF0094)

SET UP

Please follow these simple instructions to fully assemble your hands-free wallpaper stripper BEFORE use.

1.Remove hoses and Velcro straps from plastic bags.

2.	The main hose has two small black tubes	B
	coming out of one end. The larger tube
	(A) is for steam and the smaller tube (B)	A
	is for the vacuum. Attach these tubes to
	the steam plate by inserting through the
	handle hole. Attach the larger tube (A)
	to the steam outlet (D), and the smaller
	tube (B) to the vacuum inlet (C).
		D C
3.	Once the tubes are connected, clip
	the hose into the steam plate handle
	as shown.
4.	Use Velcro straps to secure both hoses
	together.

5.CEILING SET UP

Connect the Ceiling Waste Water

Drainage Hose to the Waste Water

Outlet on the steam plate. Store the

Waste Water Outlet Cover (E) in theE tube on the steam plate for security.

6.WALL SET UP

Store the Ceiling Waste Water

Drainage Hose in the tube on the

steam plate for security. Ensure the

Waste Water Outlet Cover is pushedE into the Waste Water Outlet to prevent

steam escaping when using the unit on walls.

7.Screw on the other end of the main hose to the boiler, and tighten by

hand.F

8.Connect the rubber Boiler Vacuum Tube (F) from the the vacuum outlet of the main hose to the vacuum port on top of the unit.

9.Place the end of the ceiling waste water hose into the waste water collection tank.

10.The unit is now ready to operate. Please see operation instructions below.

NB: The ceiling waste water hose is only required when working on ceilings and is not needed for work on walls. It can be secured to the main hose using the Velcro straps and stored in the tube when not in use, or left off the assembly of the product.

3