Operator's Manual
CS3814, CS3816, CS4116 Chainsaws
SAFETY DECALS
Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effectively, we have placed several safety labels on the chainsaw to remind you of this important information while you are operating the unit.
These important safety labels are illustrated below, and are shown here to help familiarize you with the location and content of the safety messages you will see as you perform normal cutting operations. Please review these labels now. If you have any questions regarding their meaning or how to comply with these instructions, reread the complete safety instruction text on the preceding pages, or contact your local dealer.
Should any of the safety labels become unreadable because of being worn, faded, or otherwise damaged during the use of your chainsaw, please use the part number information provided to order a replacement label from your local authorized dealer.
The safety labels are easily applied, and will act as a constant visual reminder to you, and others who may use the equipment. Follow the safety instructions necessary for safe, effective operation of your chainsaw.
(1)Read operator's instruction book before op- erating this machine.
(2)You must wear appropriate ear, eye, and head protection.
(3)Use two hands when operating the chainsaw.
(4)Warning! Danger of kickback.
(5)Read, understand and follow all warnings.
(8)Indicates the engine operation ON/ OFF switch. Flipping the switch to the
“O” position immediately stops the en- gine.
Location: Near the rear at the left side of the rear handle.
(9)Indicates the choke knob location. Pull out the choke knob and the choke closes; push in the choke knob and the choke opens.
Location: Near the rear at the right side of the rear handle.
(10)Indicates the oil pump adjustment loca- tion. Turn the rod using a screwdriver and
follow the arrow to the MAX position to increase chain oil flow. Turning the rod to the MIN position decreases chain oil flow.
Location: Bottom of the power unit.
For safe operation and maintenance, additional symbols are en- graved on the machine.
(6)Indicates the port for refueling the gas/oil mixture.
Location: Near the fuel cap.
(7)Indicates the port to refill the chain oil. Location: Near the oil cap
(11)Indicates the directions that the chain break is released (white arrow) and ac- tivated (black arrow)
Location: Front of the chain cover.
(12)Indicates the direction of the saw chain installation.
Location: Front of the chain cover.
Check for parts online at www.getearthquake.com or call | 9 |
