Volume and Power Handling limitations

Installation

The listed power recommendations assume you will operate your system in a way that will not produce distortion (blow your speakers). Even these speakers can be damaged by a modest amplifier if it is not operated properly. If you hear distortion (harsh or crackling noise) your’re over powering the speakers and should immediately turn the volume down. Prolonged abuse caused by over powering the speakers will cause permanent damage that may not be covered by the Earthquake limited warranty.

Speaker Placement

Speaker location is one of the key factors for better sound quality. Taking your time to place your speakers correctly ensures that your speakers will sound best in any indoor or outdoor situation. Stereo sound is best heard when the speakers are separated by at least 3-6ft. Usually placing speakers by a wall or other surface will increase your bass response. Outdoors, placement under the eaves of a roof reduces exposure to constant direct sunlight and precipitation, which will extend the speaker life. Respect your neighbors; if you know that it will affect your neighbors privacy face the speaker toward the intended listening area to contain the amount of distance that the sound will travel.

Mounting the AWS speakers

Before you fasten all items down, you may want to test the placement of your speakers to ensure that you are getting the best sound possible. Use the supplied bracket to mount the speaker vertically or horizontally on your chosen surface. The bracket offers multiple mounting options; key hole sockets and standard screw holes the difference is usually based on the surface type(you may want to consult with an installer regarding the proper hard ware to use).

To mount, remove the bracket from the enclosure. To make wire less noticeable you can insert it from the surface through the hole in the bracket and into the connections. Mount the bracket in a desired location, and fasten the speaker to the bracket. Finally face the speaker in the direction where the sound will most needed.

Earthquake also placed two 1/4” threaded inserts on the back of the speaker for alternative mounting options. Some additional options include floor stands, hanging devices etc... These items can usually be found at the dealer where you made your purchase or any other audio outlet.

If You Feel That the Speaker is Not Working

First contact the dealer where the speakers were originally purchased, if this is not an option, you may contact the Earthquake service department; 510.732.1000. Products purchased on auction website or from unauthorized Earthquake dealers will be charged shipping, labor and parts. Make sure you protect your investment and buy from an authorized dealer.

Earthquake Sound AWS-502 Volume and Power Handling limitations, Speaker Placement, Installation

Models: AWS-502