Dimensions
Easy Installation in Just a Few Steps
In a few rare occasions, the grille's diameter may slightly vary due to the tension of the mounting screws. This may make it rather difficult to mount the grille.
To solve this issue, simply cut four (4) “V” notches to rim of the grille as illustrated in the side images. This will allow the grille to flex and be easier to mount.
WARNING
Please do not use power drill when tightening the mounting screws of the speaker.
Simply tighten the screws by hand using a screwdriver to prevent the mounting ears from snapping.
Cut the hole:
using the provided cut- out template
1
Wire the speaker: using the
2
Mount the speaker: by utilizing the
3
4 | Specifications are Subject to Change Without Notice | www.earthquakesound.com | 5 |