EAW FR153z specifications Dimensional Drawing, Physical, Specifications, Input Plate

US O C A

T

				ORMA
			RF		N
		E				CE
	P						P
	L							A
A								T
IC								R
								N
								E
								R
								S
								H
								I
								P

SPECIFICATIONS FR153z

DIMENSIONAL DRAWING

FR153z		INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (RIVNUT).
		INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (NUT PLATE).
	19.75	￿		HANDLE		￿
		25.25	￿
						12.50	￿
				CL ￿￿
	GRILL PARTIALLY SHOWN		￿				8.25		￿
		FRONT			INPUT		￿		SIDES
					6.63	￿
			1.96 ￿				(13.20)		￿
	CL ￿￿				4.19	￿	CL ￿￿
		8.00	￿	3.63	￿
				BACK						19.75	￿
			POLE MOUNT SOCKET	￿					8.00	￿
							13.25		￿
	BOTTOM						20	° ￿
510949 (A)	￿						TOP
exp 01/19/00 dpm

PHYSICAL

Configuration		3-way, full range
Powering	Passive (LF/MF/HF crossover)
LF Subsystem		15-in woofer, vented
MF Subsystem	6.5-in cone, sealed subenclosure
HF Subsystem	1-in exit/2-in voice coil compres-
		sion driver on Wave Guide Plate™
Cabinet Type (shape)		Trapezoidal
Enclosure Materials	Baltic birch plywood
Finish	Black polyurethane
Connectors		2 x Neutrik NL4 Speakon
Suspension Hardware		(3) 3/8-16 threaded mounting
		points (2 top, 1 back), pole mount
		cup
Grille		Powder coated perforated steel
Dimensions		Inches	Millimeters
Height		25.25	641
Width (front)	19.75		502
Width (rear)
	13.08		332
Depth
	19.75		502
Trapezoid Angle		10° Per Side
Weights		Pounds	Kilograms
Net Weight		75	34.1
Shipping Weight	79		35.9
Companion Systems
Sub Bass	FR250z

A & E SPECIFICATIONS

The three-way full range loudspeaker systems shall incorpo- rate a 15-in LF transducer, a 6.5-in cone MF transducer and 1-in exit/2-in voice coil compression driver HF transducer.

The LF driver shall be mounted in a vented enclosure tuned for optimum low frequency response. The MF driver shall be mounted in a sealed subenclosure. The HF driver shall be loaded on an axis-symmetrical wave guide plate with a nomi- nal coverage pattern of 100° (conical). An internal passive filter network shall provide fourth order acoustical crossover and system equalization.

System frequency response shall vary no more than ± 3 dB from 60 Hz to 18 kHz measured on axis. The loudspeaker shall produce a Sound Pressure Level (SPL) of 97 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 130 SPL on axis at 1 meter. The loudspeaker shall handle 500 Watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of 1/2-in thickness void-free cross-grain- laminated Baltic birch plywood and shall be finished in black polyurethane. Recessed handels and rubber footpads shall be provided. Input connectors shall be dual Neutrik NL4 Spea- kon. Three 3/8"-16 threaded mounting points (2 top, 1 back) shall be provided as well as a recessed cup to accept a standmount pole. The front of the loudspeaker shall be cov- ered with a powder coated perforated steel grille.

The three-way full range loudspeaker shall be the EAW model FR153z.

INPUT PLATE

WHITINSVILLE, MA USA

FR153z S/N

PIN 1--...--

PIN 1+...+

Acoustic Performance Partnership Eastern Acoustic Works FR153z

One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email info@eaw.com